14
Multiplex Hardware
This coach uses SSP17 wireless switch panels to
conveniently control lighting and other functions with the
touch of a button.
Note: if the green LED at the bottom of the switch fails to
illuminate when a button is pressed you will need to
change the battery. Simply pry the switch from the wall at
each corner to expose the battery compartment on the
rear of the switch and replace the 2032 coin cell battery.
Once it has been changed, simply line up the switch on the
wall plate and snap the switch back into place.
You can check battery status for all panels by clicking on
the settings screen on the spectrum screen.
Your G8 panel is the power distribution center for the
coach. This panel receives the signals sent from your
Spectrum screen/switch panels and performs the actions
that have been requested by activating and deactivating
the required circuits.
Your G8 panel, Spectrum screen and switch panels are
connected via your coach’s
RV-C network. The G8 has a
NET LED that is used to show network status. If the NET
LED is displaying anything other than solid green and some
of the panel’s functions are not working, please contact
Firefly Integrations for technical support.
NET
LED
