Firefly Vegatouch Forest River Forester V1, Manual, Page: 5 / 37

5
Blue lines under tanks on startup -
Possible Issue: On initial 12V system
power up, the black and gray tanks read
full with a blue line under them and the
fresh tank reads empty with a blue line
under it.
Possible cause: On initial power up, if there is no water in the
tank, the system may have difficulty detecting the no water
condition. As a result, it will display a blue line under the tank reading for the
appropriate tank and indicate the following:
•
Fresh Tank – Shown with a blue line under the tank reading and the tank graphic
as being empty. Because the system is not detecting the empty fresh tank
correctly, it does not have valid data to display. As a precaution, it will display
the fresh tank graphic as empty as this is the least favorable condition for the
tank.
•
Grey Tank – Shown with a blue line under the tank reading and the tank graphic
as being full. Because the system is not detecting the empty gray tank correctly,
it does not have valid data to display. As a precaution, it will display the grey
tank graphic as full as this is the least favorable condition for the tank.
•
Black Tank – Shown with a blue line under the tank reading and the tank graphic
as being full. Because the system is not detecting the empty black tank correctly,
it does not have valid data to display. As a precaution, it will display the black
tank graphic as full as this is the least favorable condition for the tank.
Solution: Add at least 3 inches of water to the tank to allow the sensor to properly
initialize. Once there is water covering the sensor, it should start to report correct
readings and display the tank levels correctly.
LP Tank Readings:
•
Below 25% will read “Low” and the
tank level will show as normal.
•
From 25% to 75%, the tank level and
percentage will show as normal.
•
From 75% to 80 %, will read “Full” and
the tank level will show as normal.
•
80 % and above will read “Disc.” and
the tank level will be empty.
Fluid Tank Readings (TruTank):
•
Displays in 5 percent increments.
•
Below 10 % will read “ Empty ” and the
tank level will show Empty.
•
90 % and above will read “ FULL .” and
the tank shows accurate level.
Individual tank graphics represent the
percentage filled for holding tanks.
Toggle On/Off