Operation
Connect the power cable to a 13 amp supply that is located in a safe,
dry area.
The switch on the heater head is used to control the three heat
setting. (I) for 900w – (II) for 1200w – (I&II) for 2100w. The 0
position is off.
Although the patio heater is shower proof, do not use when raining
or in wet conditions.
Always disconnect the power cable from the electrical supply,
when the patio heater is not in use.
Care and maintenance
•
When disconnected from the electrical supply, clean the
outside of the patio heater with a damp cloth. Never use
corrosive or solvent cleaners or immerse in water.
•
Any maintenance or repairs including replacing the halogen
tube should only be carried out by a qualified electrician or by a
recommended service center.
Technical specification
•
Power supply 240V~ 50Hz
•
Wattage max 2100w
•
Net weight 14kg
•
Insulation class I
•
Height 230 cm