The system parameters can be checked and adjusted via the controller. But they should not be changed
casually, especially by house owners.
9.4 arameter checking and adjustment
This operation is reserved to facilitate future service and maintenance. All
parameters should not be changed casually, especially by house owners!
How to check and adjust parameters:
Long press (
≥
6 seconds)
to enter parameter checking
mode.
! Warning !
Value
Step 1
Step 2
Step 3
Step 4
Step 5
Normal display
Flash
Flash
Press to confirm the value
Press or to return
normal display.
to
Press or to adjust the value.
ress (short press) again and again
to choose parameter that needs adjusting.
If press , the rolling directionwill be
con to - or - to +).
P
Press to start parameter
setting and the parameter flashes.
.
Parameter No.
[
]
Please correspond to the serial
number in the table on page 31.
Hot Water Series
35
