Page 9
CYGHPG12-24-User-Manual-v1.6.indd
Always check the rating plate to ascertain the gross weight
of the unit.
The unit must remain upright at all times.
2.2.3 Positioning
1.
The unit must be positioned upright on a flat, solid surface. Ensure that
the unit is not at risk from being submersed in water above the fork
pockets.
2.
The unit should be positioned as close as possible to the chosen input
source (e.g. Gen. Set, solar array) and where necessary, close to its
earth point.
3.
Ensure adequate space is allowed for ventilation on all sides and that
vents are not obstructed.
Refer to lifting equipment’s operation manual for lifting
capacity and manufacturer’s operating instructions.