9
Cool
–
Tap to operate the air conditioning. The A/C will run until the current temp reaches your desired
temp and then shut off. The Climate Mode graphic will only display when the compressor is running.
Heat Pump
–
Tap to operate the Heat Pump. The Heat Pump will run until the current temp reaches
your desired temp and then shut off. The Heat Wave graphic will only display when the HP is running.
Furnace
–
Tap to operate the Furnace. The Furnace will run until the current temp reaches your desired
temp and then shut off. The Furnace can be used in conjunction with the Heat Pump and the button will
stay engaged until the user taps it off. The Flame graphic will only display when the Furnace is running.
Auto
–
Tap to enable Auto Mode. In this mode, either A/C or Heat Pump will automatically run to keep
your desired temperature consistent. Fan speeds will be adjusted automatically.
Fan speeds
–
Fan only mode is available when no other climate mode has been selected. The fan will
operate by choosing High or Low. Auto will not only turn off the fan, but also control fan speeds to get
the system to the required temp the best way possible.
Climate Control
Use the Arrows to select your
desired temperature by zone.
Current zone temperature,
Climate mode graphic and Fan
Speed indicator (H or L).
1
1
2
2
3
4
5
3
4
5
