4
USING THE BOLT SCRAPER
This can be used to clean inside the bolt carrier, under the bolt.
To use it:
1.Remove the cotter pin holding the assembly together using the cotter
pin puller
2.Remove the firing pin out the back
3.Remove the gas cam pin
4.Pull the bolt out of the carrier
5.Insert the bolt scraper in to the hole the bolt came out of and gently
rotate to remove build up (overexertion may cause damage to the bolt
carrier)
6.Assemble the bolt carrier group in the reverse order it was disas-
sembled
5
FLAT KNIVES
This is used to remove build up on the bolt and other surfaces.
Depending on the surface either knife can be used to remove exces-
sive build up.
