background image

Ancillary Products

A full range of high quality fixing and

sealing products, researched and developed

to meet Fired Earth standards, are available

for both professional and DIY use. 

Website

www.firedearth.com

All our installation guides are available 
to download from our website.

Useful Numbers

UK Sales

0845 366 0400

Export Sales          +44 (0)1295 814316

Installations

01295 814310

Technical

01295 814271

Home Deliveries

01295 814313

Other Guides Available

Wall Tiling, Floor Tiling, 
Wood Flooring and Waterproofing
Showers and Bathrooms.

Disclaimer

The specifications and technical information given 

in this publication are intended for guidance and

although they are to the best of our knowledge correct,

they are given without warranty. 

We cannot accept any responsibility for reliance placed

upon the advice contained herein since practical

expertise and site conditions are outside of our control.

Neither do we accept liability for the performance of

the product arising from such use. This does not affect

your statutory rights.

Fired Earth is a trading name of Aga

Consumer Products Limited. Registered 

in England and Wales under Registered

Number 3872754. Registered Office

Address - 4 Arleston Way, Shirley, 

Solihull B90 4LH.

Glossary

BTU’s - 

(British Thermal Units) the

measurement used to calculate the required

heat for a particular room to reach the

recommended temperature. The heat

source/s within a room must provide this

amount of heat as a minimum.

Guarantee –

10 years for the mats provided

installed correctly and not physically

damaged 1 year for any electronic

controls/switches etc

IEE –

Institute of Electrical engineers

Insulation –

a product which prevents 

heat loss, but which must be sufficiently

rigid for tiling

Programmable Thermostat –

reading the

temperature of the air or the floor

depending on the chosen system, the

thermostat can be programmed to switch

the system on and off by time and also 

by temperature.

RCD –

residual current device –shuts of the

supply when a fault is detected reducing

the risk form electric shock

Sole source heating –

it is not always

possible to sufficiently warm all rooms at

all times of the year with this type of

heating. Various specifications of the

room/s to be heated will be required to

confirm the required BTU’s and therefore if

sufficient quantities of the mats can be

installed to produce the heat required.

Watts –

measurement of energy, 1000

watts is equivalent to 1kw.

10

Summary of Contents for Fired Earth Underfloor Heating







Reviews: