Make a note of the MAC address prior to permanent installation as you will need
this when activating the Gateway for the first time.
3. Connect Power
cable here
To remove the Gateway from a wall:
Insert a small screwdriver into the
hole on the side and use it to slide the Gateway up. The Gateway will lift off the
screws that attach it to the wall.
INSTALLATION INSTRUCTIONS
1. The Gateway is designed to lie flat or be secured to a wall.
2. If required, use the supplied plastic anchors and screws to fit
the Gateway to the wall.
GN5520R1
FireAngel Safety Technology Limited
Vanguard Centre, Coventry CV4 7EZ UK
30mm
Drill hole spacing
Mounting on a wall:
Please ensure that
you use the screws
provided, as they
were chosen
specifically for use
with this product.
Model No. WG-2
