manualshive.com logo in svg

FireAngel WBS-616, User Manual

Share
Download
FireAngel WBS-616 User Manual Download Page 29

28

TROUBLESHOOTING

Problem

Solution

Power indicator light is not 
illuminated when the Warning 
Handset is in the cradle.

Check that the wall adaptor is plugged into an AC supply and 
the AC supply is switched on.
Ensure the Warning Handset is pushed fully into its cradle.

While connecting an alarm, the 
Warning Handset does not 
respond.

Make sure the alarm is Wi-Safe compatible and is working 
correctly.
Ensure the handset is in its “learn” mode (see “How to Install 
your Warning Handset - connect” page 

12

).

The alarm may already be recognised by the Warning Handset. 
Return the Handset to the cradle and carry out a self test on 
the alarm (see “Testing” on Page 14).

The Warning Handset “chirps” and 
the “low battery” light flashes once 
per minute.

The battery is low and must be replaced. See “Battery 
Replacement”, page 

18

.

The Warning Handset “chirps” and 
the “low battery” light does NOT 
flash.

The Power LED will also be flashing, meaning that the Handset 
is not receiving power. Ensure the Handset is pushed fully into 
its cradle and the AC power is switched on at the wall socket.

Summary of Contents for WBS-616



































Reviews:

No comments

Brands by name

Popular brands

Load more brands