13
Replace the remote in its cradle. If more
alarms are to be learnt, repeat the entire
“connect” procedure.
ii
If an alarm has already been learnt by your
Warning Handset, repeating the process will
not give a response.
iii
The Warning Handset will learn any
compatible, working FireAngel Wi-Safe alarm
within range. It is very unlikely that one of
your neighbours will be carrying out the same
procedure at the same time.
iv
Additional Wi-Safe alarms can be added to
your system at any time. This will not affect the
communication between the Handset and any
alarms that have already been learnt into the
system.
v
Your Warning Handset can be connected to
20 different Wi-Safe alarms.
vi
You can have more than one Warning
Handset in your Wi-Safe system but each
Warning Handset must be individually
connected to each alarm.
have been connected. Replace the Warning
Handset in the cradle; all lights except the green
“power” light will be extinguished. The Warning
Handset is now in its normal “standby” mode,
i.e. waiting to respond to alarms that have been
connected to it.
Once your Warning Handset has been connected
to your Wi-Safe alarms it is crucial you test that
the Handset receives a signal from all the alarms in
the system in the position where the Handset will
be sited. See section 4 ‘Testing’.
IMPORTANT:
If you move the
Handset to another location you should
check that it still receives a signal from all the
alarms in the system, by retesting each alarm.
NOTES
i
If the Warning Handset is left out of its cradle
for more than 4 minutes without receiving
any signals, when in learn mode, the lights will
extinguish and no more signals will be learnt.
