background image

22

6 YEAR WARRANTY

Warranty Coverage

FireAngel Ltd warrants to the original purchaser 
that  its  enclosed  sealed  carbon  monoxide  alarm 
be free from defects in materials and workmanship 
under  normal  residential  use  and  service  for  a 
period of 6(six) years from the date of purchase. 

Provided it is returned with postage prepaid and 
proof  of  purchase  date,  FireAngel  Ltd  hereby 
warrants  that  during  the  6(six)  year  period 
commencing from the date of purchase FireAngel 
Ltd,  at  its  discretion,  agrees  to  replace  the  unit 
free of charge. The warranty on any replacement 
FireAngel  CO-808S  Sealed  Carbon  Monoxide 
Alarm,  will  last  for  the  remainder  of  the  period 
of  the  original  warranty  in  respect  of  the  alarm 
originally  purchased  –  that  is  from  the  date  of 
original purchase and not from the date of receipt 
of the replacement product. FireAngel Ltd reserves 
the right to offer an alternative product similar to 
that  being  replaced  if  the  original  model  is  no 

longer available or in stock. This warranty applies 
to  the  original  retail  purchaser  from  the  date  of 
original  retail  purchase  and  is  not  transferable. 

Proof of purchase is required.

Warranty Disclaimers

This  warranty  does  not  cover  damage  resulting 
from accident, misuse, disassembly, abuse or lack of 
reasonable care of the product, or applications not 
in accordance with the user manual. It does not 
cover events and conditions outside of FireAngel 
Ltd’s  control,  such  as  Acts  of  God  (fire,  severe 
weather  etc).  It  does  not  apply  to  retail  stores, 
service  centres  or  any  distributors  or  agents. 
FireAngel  Ltd  will  not  recognise  any  changes  to 
this warranty by third parties. FireAngel Ltd shall 
not  be  liable  for  any  incidental  or  consequential 
damages caused by the breach of any expressed 
or  implied  warranty.  Except  to  the  extent 
prohibited by applicable law, any implied warranty 
of  merchantability  or  fitness  for  a  particular 
purpose is limited in duration to 6 years.

Summary of Contents for CO-808S



























Reviews: