9
To Mount on a Shelf:
The detector has a flat base allowing it to simply
stand on a shelf. The backing plate is not required
for this application.
WARNING:
When mounting on a
shelf, please adhere to same positional
recommendations as described on page 7 and
8.
NOTE:
Your detector can be removed from
the backing plate by following the instructions
on page 14.
HOW TO INSTALL YOUR
DETECTOR
NOTE:
This Carbon Monoxide
detector must be installed by a
competent person.
Firstly write the installation date on the back of
your alarm in the designated box.
We recommend that your detector is installed
on the wall.
To Mount on a Wall or Ceiling:
Use the backing plate to mark the position of the
drill holes.
Drill 5mm (3/16”) holes into the wall. Insert the
plastic wall plugs. Place backing plate over drilled
holes and screw in the screws. Ensure screws are
fully tightened to allow detector to be mounted.
Fixing Holes
