Fire Stone Legacy LG24i Operating And Assembly Instructions Manual Download Page 5

Fire Stone Home Products  •  Legacy Gas Grill  •  Rev. C

5

Beware of Spiders

Safety Instructions

•   If the hose appears damaged do not use gas grill. Call 

your dealer for a factory authorized replacement hose. 

•   Keep the gas regulator hose away from hot grill surfac-

es and dripping grease. Avoid unnecessary twisting of 
hose. Visually inspect hose prior to each use for cuts, 
cracks, excessive wear or other damage. 

•  

Never

  light  the  gas  grill  with  the  lid  closed  or  before 

checking to insure the burner tubes are fully seated over 

the gas valve orifices. 

•  

Never

  allow  children  to  operate  the  grill.  Do  not  allow 

children to play near the grill. 

WARNING

WARNING

 

 

Fire Risk 

 

 

Explosion Risk

 

A strong gas smell, or the hissing sound of gas indi-

cates a serious problem with the gas grill or the LPG 

cylinder. 

•   Get away from the LPG cylinder. 

•   Do not try to fix the problem yourself. 

•   Call the fire department. (Do not call near the LPG cyl

-

inder because the telephone is an electrical device.) 

Failure  to  immediately  follow  the  steps  listed  above 

could result in a fire or explosion which could cause 

property damage, serious bodily injury or death. 

CAUTION:

  Spiders  and  small  insects  occasionally  spin 

webs or make nests in the grill burner tubes during tran-
sit  and  warehousing.  These  webs  can  lead  to  a  gas 

flow  obstruction  which  could  result  in  a  fire  in  and 
around the burner tubes. This type of fire is known as 

a  “FLASH-BACK”  and  can  cause  serious  damage  to 
the grill and create an unsafe operating condition for the 
user. 

Although an obstructed burner tube is not the only cause of 

“FLASH-BACK”, it is the most common cause. 

To  reduce  the  chance  of  “FLASH-BACK”,  clean  the 

burner tubes before assembling the grill, and at least 

once a month in late summer or early fall when spi-

ders  are  most  active. Also  perform  this  burner  tube 

cleaning procedure if the grill has not been used for an 

extended period of time.

Natural Gas Safety 

(Conversion Kit available through Fire Stone) 

This converted natural gas grill is designed to operate on 
natural gas ONLY, at a pressure of 7” water column (W.C.) 

(1/4 psig or 1.75 kpa), regulated at the residential meter. 

Check with the gas utility for local gas pressure and with 
the local municipality for building code requirements. If the 
residential gas utility line pressure has not been regulated 
to 7” W.C., contact the local gas utility or gas grill dealer for 
professional assistance. 

Check with the gas utility or with local building codes for 
instructions to install gas supply line, or call a licensed and 
knowledgeable installer. The grill must be chained to stay 
in one location so that it cannot roll. 

It is recommended that an “ON-OFF” shut-off valve be in-
stalled at the gas supply source: 

• outdoors after gas line piping exits outside wall and before 
quick-disconnect, or before gas line piping enters ground. 

• indoors in the branch fuel line in an accessible location 
near the supply line.  

Converting to Natural Gas

 

 

Fire Risk 

 

 

Explosion Risk 

Only factory authorized dealers may convert the grill 

from LP to NG. 

•   Any attempt to do otherwise voids the product war-

ranty and releases Fire Stone from all liabilities due 

to unauthorized conversion. 

•   Failure to comply with these instructions could re-

sult in fire or explosion which could cause property 

damage, serious bodily injury, or death. 

Pipe sealing compound or pipe thread tape of the type re-

sistant to the action of natural gas must be used on all male 

pipe threads when making the connection. 
Disconnect the gas grill from fuel source when the gas sup-

ply is being tested at high pressures. This appliance and its 

individual shut-off valve must be disconnected from the gas 

supply  piping  system  during  any  pressure  testing  of  that 

system at pressure in excess of 1/2 psi (3.5kpa). 

Turn off the gas grill when the gas supply is being tested 

at low pressures. This appliance must be isolated from the 

gas supply piping system by closing its individual manual 

shut-off valve during any pressure testing of the gas sup-

ply piping system at pressures equal to or less than /2 psi 

(3.5kpa). 

Summary of Contents for Legacy LG24i

















Reviews: