Fire Stone Legacy LG24i Operating And Assembly Instructions Manual Download Page 11

Fire Stone Home Products  •  Legacy Gas Grill  •  Rev. C

WARNING

WARNING

Figure 2

WARNING

WARNING

Lighting Instructions

Checking For LP Gas Leaks

Never test for leaks with a flame. Check for gas leaks prior 

to first use, at the beginning of each season, or every time 

the LPG cylinder is changed. Follow these four steps: 
.   Use a commercially-available non-corrosive leak check 

solution. 

2.   Turn the grill control knob to the full OFF position, then  

turn the gas ON at source. 

3.   Apply  the  leak  check  solution  to  all  gas  connections. 

Bubbles  will  appear  in  the  leak  check  solution  if  the 

connections are not properly sealed. Tighten or repair 

as necessary. 

4.   If there is a gas leak that cannot be repaired, turn off 

the gas at the source, disconnect fuel line from the grill 

and call the gas grill dealer, or gas supplier for repair 

assistance.  

Basic Lighting Procedures 

.   Familiarize  yourself  with  the  safety  guidelines  at  the 

front of this manual. Do not smoke while lighting grill or 
checking gas supply connections. 

2.   Be sure the LPG cylinder is filled. 

3.   Make sure all gas connections are securely tightened. 
4.   Ensure that 2 - “D” size batteries have been installed. 

5.   Open the grill lid. 

Lighting the Grill by Match

To light the gas grill by match, follow steps  through 6 of the 
Basic Lighting Procedures. Then, insert a lit match through 
the  lighting  hole  on  either  side  of  the  grill  (see  Figure  2). 
Turn the nearest control knob to the HIGH setting to release 
gas. The burner should light immediately. 

6.   Set  control  knob  to  OFF  and  open  the  LPG  cylinder 

valve. 

7.   Push and turn ignitor control knob to HIGH. The built-in 

ignitor will click and spark to ignite burner. Ignitor may 
need realignment to generate adequate spark. 

8.   Confirm ignition by viewing flame through the convec

-

tion plate holes. 

9.   If the burner does not light, turn the control knob to OFF, 

wait 5 minutes for gas to clear, then retry. 

0.  Adjust control knob to the desired cooking temperature. 

 

 

Explosion Risk 

 

 

Fire Risk 

Failure to open the grill lid during the lighting procedures 

could  result  in  a  fire  or  explosion  which  could  cause 

property damage, serious bodily injury or death. 

 

 

Explosion Risk 

 

 

Fire Risk 

 

 

IF YOU SMELL GAS:

•  Shut off gas supply to the grill. 

•  Extinguish any open flame. 

•  Open grill lid. 
•  If odor continues, immediately call your gas com-

pany or local fire department. 

Failure to comply with these instructions could result 

in a fire or explosion which could cause property dam

-

age, serious bodily injury or death. 

 

 

Fire Risk 

 

 

Explosion Risk 

A strong gas smell, or the hissing sound of gas indi-

cates a serious problem with the gas grill or the LPG 

cylinder. 
•   Get away from the LPG cylinder. 

•   Do not try to fix the problem yourself. 
•   Call the fire department. (Do not call near the LPG cyl

-

inder because the telephone is an electrical device.) 

Failure  to  immediately  follow  the  steps  listed  above 

could result in a fire or explosion which could cause 

property damage, serious bodily injury or death. 

Hot Surfaces 

•  

Never

 lean over the grill cooking area 

while lighting the gas grill. 

•  Keep face and body a safe distance (at 

least 18 inches) from the lighting hole or 

burners, when lighting the grill by match.

Summary of Contents for Legacy LG24i

















Reviews: