Contact us for assistance: (866) 985-7877 | www.wtliving.com
14
CONVERSION TO NATURAL GAS
WARNING!
To avoid the possibility of burns conversion should only be done when the fire pit
is completely cool. Ensure burner is turned off. Turn gas off at source and disconnect the
appliance before beginning conversion.
WARNING!
Fire Glass may have sharp edges. Wear safety glasses and gloves when handling.
WARNING!
We recommend that the conversion be performed by a licensed gas fitter, and all
connections must be leak tested prior to operating the appliance.
2
3
4
1.
If desired, r
emove the
Burner
from the enclosure.
(Remove the Fire
Glass from the Burner first.)
Take care not to damage or
kink the
Thermocouple Wire
.
Alternatively, you may wish to perform the
conversion from below via the
Tank Access Door
.
2.
Disconnect the stainless steel
Flex Line
from the brass
Connector
Valve
using two Wrenches.
3.
Unscrew the
Connector Valve
from the
Burner Pipe
.
4.
Slide the
Air Shutter
tube included in the conversion kit onto the
Burner Pipe
, covering the vent screens.
5.
Remove the small brass
Propane Orifice
from
the burner end of the
Connector Valve
.
6.
Replace the
Propane Orifice
with the
Natural Gas Orifice
supplied.
Fully tighten with Wrench for a secure seal.
7.
Screw the
Connector Valve
back into the
Burner Pipe
. Fully tighten
with Wrench for a secure seal.
8.
Re-attach
Flex Line
to
Connector Valve
. Fully tighten with
Wrenches for a secure seal.
9.
Place
Burner
back into enclosure if you removed it.
10.
Place the
Conversion Label
included with your
Conversion Kit
on
the inside of the
Tank Access Door
.
11.
Replace the existing LPG hose and regulator with an NG regulator
and hose (not included).
12.
Connect your gas supply and perform a Leak Test at each
connection point. Leak Test instructions are found elsewhere in this
manual.
Summary of Contents for Bellante
Page 2: ......
