Fire Sense 62905 Instructions Manual Download Page 4

Contact us for assistance:  (866) 985-7877  |  www.wtliving.com 

      4

 SAFET

Y

When using electrical appliances, to reduce the risk of fire, 

electric shock and injury to persons, 

always follow 

basic 

precautions, including the following:

1.

Read all instructions before use.

2.

This heater is hot when in use. To avoid burns, do not
let bare skin touch hot surfaces. If provided

,

 use

handle

 

when moving this heater.

3.

Keep combustible materials such as furniture, pillows,
bedding, papers, clothes, and curtains 

3 ft

 / 

.91 

m

 or

further 

away from the front

, sides, and back

 of heater.

4.

Extreme caution is necessary when any heater is used
by

 

or near children or invalids and whenever the

heater is in

 

operation it must not be left unattended.

5.

Always unplug the heater when not in use.

6.

Do not operate any heater with damaged cord or
plug or after the heater has malfunctioned or has been
dropped or damaged in any manner. Return heater to
an

 authorized

 service facility for repair.

7.

Do not use outdoors.

8.

This heater is not intended for use in bathrooms,
laundry

 

areas and similar indoor locations

 where

water may be present

. Never locate heater

 

where it

may fall into a bath tub or other water container.

9.

Do not run cord under carpeting. Do not cover cord
with

 

throw rugs, runners or the like. Arrange cord

away from

 

traffic areas and where it will not be

tripped over.

10.

To disconnect heater, turn control to off, then remove
plug from outlet.

11.

Connect to properly grounded outlet only.

12.

Do not insert or allow foreign objects to enter any
ventilation or exhaust opening as this may cause an

electric shock or fire, or damage the heater.

13.

To prevent a possible fire, do not block air intake or

exhaust in any manner.

14.

Do not use on soft surfaces, like a bed, where
openings

 

may become blocked.

15.

A heater has hot and arcing or sparking parts inside.

Do not use it in areas where gasoline, paint or
flammable

 

liquids are used or stored.

16.

Use this heater only as described in manual. Any other
use not recommended by the manufacturer may
cause

 

fire, electric shock, or injury to persons.

17.

Avoid the use of an extension cord because the

extension cord may overheat and there is a risk of fire.

18.

Do not strike the heater glass.

19.

Always use properly grounded

 outlets;

 it may break

fused and

 

polarized outlets

.

20.

Always disconnect power before performing any

cleaning or maintenance, or relocating the heater.

21.

When transporting or storing the heater

,

 keep in a dry

 

place, free from excessive vibration and store so as to

 

avoid damage.

22.

The flame effect is powered by a motor and it is normal

 

for the motor to make some noise as it slowly rotates

 

and

 

helps to create the beautiful 3D flame effect. Some

 

rooms

 

have more or less furnishings than others resulting

 

in

 

varying noise amplification.

23.

Whil

e

 every effort is made to ensure packing materials

 

are kept outside of the plastic bag which covers your

 

heater in the box, there is 

some

 chance that

 

packing

 

material

 may lodge itself in the heater part of the unit. If

 

you notice this on inspection, please remove it.

24.

When turning your heater on for the first time it is

 

normal

 

for the heater to emit a 

mild

 ‘new heater’ smell

 

which

 

quickly passes.

25.

You may notice some light coming from under

 

or from

 

the sides of the unit. This is normal and the holes allow

 

the 

unit to ‘breathe’. Do not attempt to block these holes.

26.

This heater is to be used on a 110 / 120 V, 11.2 A MP,

 

grounded circuit. Do not use in an outlet controlled
by a switch or dimmer switch. The cord supplied with

 

the

 

heater has a 

2

 blade plug

 with a

 round pin on the plug for

 

grounding purposes. If a 

3

 slot receptacle

/outlet

 is not

 

available, 

you must use 

an adapter 

which

 must

 

be 

properly grounded to the outlet box. Avoid plugging

 

other 

appliances into the same circuit as heater. 

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN THE UNIT

NO USER-SERVICEABLE PARTS INSIDE

HIGH TEMPERATURE

KEEP ELECTRICAL CORDS, DRAPERY AND OTHER

 

FURNISHINGS AT LEAST 

3 FEET 

.9

1 MET

ER

 FROM

FRONT OF THE HEATER AND  AWAY FROM

 

THE SIDES

 

OF HEATER 

WARNING

RISK OF FIRE - KEEP COMBUSTIBLE MATERIAL AWAY

FROM TOP OF HEATER.

SERVICING SHOULD BE DONE ONLY WHILE THE
HEATER IS UNPLUGGED FROM

POWER SUPPLY.

The flame effect on the wall hanging fireplace is created by 

LED surface mounted components that are designed to last 
the life of the product. Do not remove back cover of heater, 
no user serviceable parts are contained within.

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for 62905















Reviews: