8
3. Attach the Connecting Rod (E) to the Burner (C) by sliding it through
the hole located in Side Panel (F). You will use the Control Knob on
the end of the Connecting Rod for lighting and controlling the flame
of the fire pit. There will be a tag affixed to the Connecting Rod that
explains the use of the Control Knob as shown on page 13 of this
manual. Please refer to page 13 for detailed lighting and operation
instructions.
4. Attach the 2 - Side Panels (G) to the Side Panels (F & H)
using 8- Bolts (6*20mm)/Washer(M6) (L) with the Allen
Wrench (O). (NOTE: The feet on the Side Panels should be
facing UPWARD. This will ensure that the HOLE located on the
bottom of each Side Panel (G) will be in the correct position to
secure the Gas Tank Bracket and Gas Tank Support in Step 5.)
Do not over tighten the Bolts as you may need to adjust to
properly align and secure these parts.
ASSEMBLY
3
4
Summary of Contents for 61832
Page 12: ......
