7
NOTE: It is best to use TWO PEOPLE for assembly of this gas fire pit.
1. Attach 4 – Bolts (8*55mm) (K) to the underside of the Table Top (B)
with the Screwdriver (M). Then set the Burner(C) onto the Table Top (B).
Place the Burner Bracket (D) over the Burner and align it with the
Bolts (K) that you just secured to the Table Top. Place the Burner
Bracket (D) down over the Bolts.
2. Attach the Side Panels (F & H) onto the Table Top by aligning the holes
found at the top of the panels with the Bolts on the Table Top.
(NOTE: The feet on the Side Panels should be facing UPWARD). Make
sure the Burner (C) is turned so that the Control Knob on the Burner is
facing Panel F. (NOTE: There will be a HOLE in Panel F that fits the
Control Knob on the Burner.) Secure the Side Panels (F & H) to the
Table Top using 4 – Washer(M8)/Spring Washer/Nuts (K) with the
Wrench (N). Do not over tighten as you may need to adjust to properly
align the other Side Panels.
ASSEMBLY
1
2
Summary of Contents for 61832
Page 12: ......
