Fire-Lite LDM-32F, Instruction Manual

Page: 44 / 64

Appendix B: MS-9200 Configuration
44
LDM-32F PN 50055:C 03/20/01
The figure below is an example of the connections used when setting the LDM
module for Alarm/Trouble mode.
Figure 30 Connections for Alarm/Trouble
The figure below illustrates pin usage of output connectors for system functions
in alarm/trouble mode.
Figure 31 System Functions to Output Connectors - 1
The figure below illustrates pin usage of output connectors for system functions
in alarm/trouble mode with 8-Point shift selected.
Figure 32 System Functions to Output Connectors - 2
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
J5 J6 J7 J8
LC
M32
F
-c
onn.cd
r
Alarm - First 4 Zones or Points
Trouble - First 4 Zones or Points
Alarm - Second 4 Zones or Points
Trouble - Second 4 Zones or Points
Alarm - Third 4 Zones or Points
Trouble - Third 4 Zones or Points
Alarm - Fourth 4 Zones or Points
Trouble - Fourth 4 Zones or Points
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
J5 J6
Supervisory (Yellow)
AC Fail (Red)
Signals Silenced (Yellow)
System Trouble (Yellow)
System Alarm (Red)
System Status Indicators
Note: Pins not marked are not used
LC
M
32F-
J
5J6.cd
r
17 18 18 20 21 22 23 24
25 26 27 28 29 30 31 32
J7 J8
Supervisory (Yellow)
AC Fail (Red)
Signals Silenced (Yellow)
System Trouble (Yellow)
System Alarm (Red)
System Status Indicators
LC
M3
2F-
J
7J8.cdr
Note: Pins not marked are not used