LCD-80FC Indicator
SW1 DIP Switch Settings
13
Document 53244 Rev. A 03/14/08 P/N 53244:A
.
Note: SW1 DIP switch settings as illustrated in Figure 1-3 are as
follows:
1. DIP switch 1: OFF (not used)
2. DIP switch 2: ON = piezo sounder enabled (requires approval of
LAHJ)
3. DIP switch 3: OFF = Receive Only. This setting is used for all
indicators except the last or only LCD-80FC Indicator on the
EIA-485 line
4. DIP switches 4 through 6: OFF = Configured correctly for
operation with the available FACP
5. DIP switches 7 and 8: OFF (these switches are not used)
Figure 1-4: DIP Switch Settings Example
switch 1 shown
in OFF position
switch 2 shown in ON position
dip
s
wl
c
d
8
0
fc
.c
d
r
switches 3 through 8
shown in OFF position
