2
FC-RM Remote Microphone Installation Document —
P/N 51247:C 4/07/2008
FC-MIM Microphone Interface Module Installation
The supplied FC-MIM Microphone Interface Module must be installed on the main circuit board of the host audio panel
(ACC-25/50, ACC-25/50ZS, ACC-25/50DA, FC-25/50X or FC-25/50DA).
To install the FC-MIM:
1.
Be sure all power (AC and DC) is removed from the panel before installing the FC-MIM
2.
Position the connector on the FC-MIM module over the audio panel main circuit board Remote Mic connector and
gently press down until the module is properly seated. Be careful not to bend or break any pins on the connector
3.
Secure the FC-MIM module to the metal standoff on the main circuit board with the supplied screw
!
CAUTION: CIRCUITS CONTAIN STATIC-SENSITIVE COMPONENTS
ALWAYS GROUND YOURSELF WITH A PROPER WRIST STRAP BEFORE HANDLING ANY CIRCUITS SO
THAT STATIC CHARGES ARE REMOVED FROM THE BODY. USE STATIC SUPPRESSIVE PACKAGING TO
PROTECT ELECTRONIC ASSEMBLIES.
Power
Ground
+ Audio
- Audio
Earth
FC-MIM Microphone Interface Module
Standoff Mounting Hole
Remote Microphone Trouble LED
To Remote Mic Connector
Metal Standoff
Audio Panel Main Circuit Board
Figure 2: Installing an FC-MIM Module
to Remote Microphone Cabinet
