OSI-RI by Fire-Lite Alarms
OSI-RI-FL Installation Guide
E56-6584-001 | October 2018
21
9
Mounting Instructions
9.1
Mounting the Reflector
The reflector can be mounted to the wall using the supplied drilling template see (
B Appendix II. Reflector
Drilling Template
). The reflector has 4 mounting holes, one in each corner.
All four-hole locations should be used to provide a secure mounting. The reflector must be mounted such that
it is within 10° in both the X and Y planes of the transmitter/receiver unit. See Figure 9-1 and Figure 9-2. The
reflector must also be mounted such that the plane of the reflector is perpendicular to the optical line of sight to
the transmitter/receiver unit. The maximum tolerance for non-perpendicular mounting locations is 10°. See
Figure 9-3.
If the reflector cannot be mounted within 10° of the transmitter/receiver unit then the multi-mount kit
(6500MMK) may be used to provide greater angular adjustment of the transmitter/receiver unit. If the
perpendicular plane of the reflector cannot be mounted within 10° of the optical line of sight then the multi-
mount kit can be used for the reflector.
WALL
Y
Reflector
10°
10°
Acceptable mounting
locations for reflector
X
Figure 9-1: Reflector Mounting Guidelines
Figure 9-2: Reflector Mounting Guidelines
Summary of Contents for OSI-RI-FL
Page 2: ......
