OSI-RI by Fire-Lite Alarms
OSI-RI-FL Installation Guide
E56-6584-001 | October 2018
13
5
Approved Accessories
The following accessories can be purchased separately for use with this beam detector.
5.1
6500MMK
The 6500MMK allows reflected beam detectors and reflectors to be mounted to
either a vertical wall or the ceiling. The kit allows for additional alignment range in
cases where the detector and reflector cannot be mounted within 10° of each
other. The kit includes the hardware necessary to mount either a single
transmitter/receiver unit or a single reflector.
5.2
BEAMHKR
The BEAMHKR allows the reflector to operate in environments prone to the
formation of condensation. Condensation forming on the reflector may result in
trouble or false alarm conditions. BEAMHKR will lessen the likelihood of
condensation by maintaining the reflector at a temperature that is slightly higher
than surrounding air. The kit requires a 24V power supply.
5.3
RTS151KEY (Test Function)
The remote test accessory allows for the beam detector to be tested and reset
remotely from ground level.
The test accessory provides test and reset functions and a red LED that mimics the
alarm LED on the detector.
Summary of Contents for OSI-RI-FL
Page 2: ......
