14 |
P a g e
Care and Maintenance
Regularly inspect your ear seals and mic muff for wear. Replace as needed. If your
headset sustains significant damage (holes or cracks in the ear domes, or
headband, etc., the Headset should be immediately repaired or replaced.
Clean the Headset and ear seals with a mild soap and water mixture only. The
foam mic muff may be removed and cleaned using a mild detergent, or replaced
by ordering from Firecom.
WARNING: Do not store the Headset in high temperature environments or
direct sunlight.
Mic Muff Replacement
Replace the mic muff every 3 months for optimal performance.
To replace the Mic Muff:
1.
Remove the old mic muff and o-ring holding it in place.
2.
Slide the new mic muff over the microphone.
3.
Slide the o-ring over the mic muff to hold it in place on the microphone as
shown.
Ear Seal Replacement
Replace the ear seals every 6 months for optimal performance and to maintain the
headset NRR.
WARNING: Worn ear seals will degrade the Headsets ability to reduce noise
and protect the users hearing.
To replace the ear seals:
1.
Remove the old ear seal by pulling on the edge and peeling it over the lip
of the ear dome.
2.
Starting at the bottom, place the new ear seal on the dome. Pull over the
lip of the ear dome using your finger. Do not use any sharp tool as it may
damage the ear seal and reduce hearing protection.
Summary of Contents for FHW50X
Page 2: ......