background image

       

Mounting the Fire Cam BlackJack Holder

With set screws loose, fit the BlackJack mount on the right or left brim of the fire helmet. It 

can be installed above the brim or below the brim depending on the view from your camera. 

Snug the 2 set screws on the brim BEING CAREFUL NOT TO OVER TIGHTEN. Place the 

camera inside of the BlackJack mount making sure the button is on the top and camera is 

level. Tighten down the set screw to hold the camera BEING CAREFUL NOT TO OVER 

TIGHTEN. If the set screw starts to make marks on the camera, this will not damage the 

integrity of the unit. A small piece of black tape can help limit the marks.

WARRANTY / DISCLAIMER:

Abuse of Camera IS NOT covered under warranty. Fire Cam warrants its products against 

defects in material or workmanship for 12 months from date of purchase unless otherwise 

specified. The Fire Cam Mini HD and the Fire Cam 1080 Fire Helmet Cameras warranty are 

limited to the replacement or repair of the defective item at no charge if we determine the 

item to be defective. This warranty shall not apply to any item subject to misuse including 

such as failure by buyer to follow instructions, product modification, ordinary wear and tear, 

negligent or improper operation. Abuse of camera, cable or accessories IS NOT covered 

under the warranty. Fire Cam products are not recommended for concrete training towers 

or flashover chambers where it could sustain high temps for long periods of time. Electronic 

damage due to over-voltage, incorrect polarity from product power supplies, or incorrect 

MAINS voltage is not covered under the warranty. DO NOT USE ANY AFTERMARKET 

CHARGERS FOR YOUR CAMERAS. Fire Cam chargers are designed specifically for Fire 

Cam’s only. Modification, repair, or attempted repair by anyone other than Fire Cam or 

without the written permission of Fire Cam will void this warranty. This warranty covers the 

cost of factory repair, labor and parts on eligible equipment which is returned. Equipment, 

which is repaired under this warranty will be returned freight prepaid. If it is determined that 

the Fire Cam does not need repair, the purchaser shall pay for return shipping charges. 

Disclaimer: Fire Cam does not assume any responsibility for any accidents or injuries 

incurred to the user of the Fire Cam Fire Helmet Camera.

WARNING!

Firefighting is a dangerous activity and should only be performed by a trained professional. 

The end user of Fire Cam products assumes all responsibility connected with the use of this 

product including but not limited to continuing education, and activity that conforms to local 

Standard Operating Procedures. Neither the manufacturer nor any distributor assumes any 

liability for injuries sustained while using Fire Cam products. The Fire Cam® Fire Helmet 

Cameras™ are manufactured of anodized aluminum, and may retain heat for several 

minutes after being exposed to a heated environment such as a structure re or training re 

so it needs to be handled with care. The end user is responsible for installation consistent 

with the mounting instructions, as well as regular safety inspections of the BlackJack Holder 

and Fire Cam Fire Helmet Cameras. For further questions, please go to 

www.FireCam.com

  

under the "contact us" page.

Summary of Contents for 1080









Reviews: