WATER RESISTANT AUDIO CAP (WITH HOLE)
is used for standard
firefighting conditions and enables the camera to be water resistant
but NOT waterproof underwater. The hole allows audio to enter the
unit for recording.
WATERPROOF CAP (WITH NO HOLE / NO AUDIO)
is used for
heavy water conditions which can submerge the camera.
You will need
to use 2 Orings and add some silicon grease from time to time, especially
before using underwater. Make sure the rear WATERPROOF CAP (no hole)
is firmly closed.
Charging the battery
Unscrew the rear cap located at the rear of the camera and Plug the USB charger into the
camera. The charging LED is on while charging and will turn off when the battery is fully
charged. On the first use, charge the battery 2~3 hours before use.
Take Video with Fire Cam 1080
Turn on the Fire Cam 1080 by pressing the Power/Shutter button once. The BLUE
LED will be on and the RED LED flashes. This will indicate it is in standby mode and
it will start recording automatically.
To STOP recording and save a file, simply press the button once. This will save the
file to the SD card.
During operation, video files will automatically be saved
every 5 minutes. You may choose to have files saved every 5, 10, 15, 20 or 30
minutes in the Date and Time settings.
Turn OFF the Fire Cam 1080 by holding the button down for more than 2 seconds.
The RED LED flashes and the unit will beep 6 times and turn OFF.
Card slot empty
If there is no Micro SD card in the Fire Cam 1080, the red and blue LED will flash for 30
seconds, then the camera will switch off automatically.
Summary of Contents for 1080
Page 1: ...fire cam 1080 user manual ...
