Fiplex DH7 Series, User & Installation Manual

Page: 37 / 42

UM-0821 32

Tag: user can set a tag to ease Signal Booster identification. For modifying the
TAG, write a new value in text field and click over Apply Changes link

IP: At this page, Signal Booster IP address, network submask, gateway address
and IP addresses of SNMP Managers are shown. User can set addresses of two
SNMP Managers (IP where SNMP agent will send TRAP information). To modify,
click over Apply Changes link after writing new values on text fields.

Password: to modify webpage password, old password is required, and new
password needs to be written two times. Afte
r clicking on “Apply Changes” link, new
authentication screen appear, where user must write new password.

Downlink Spectrum: this page shows estimation for downlink input and output
spectrum. Estimation for output spectrum takes into account RF input levels, and
gain, bandwidth filters and squelch options programmed by the user, and it can be a
useful tool for users to know how the undesired signals are rejected by the channel
selective Signal Booster. Available spans are 1,2,3,4 and 5MHz. User can change
start and stop frequency modifying text field placed at the page bottom