Fiplex DH140-R, User & Installation Manual

Page: 7 / 45

DH140-R 3
FCC Compliance
This is a 90.219 Class B device.
WARNING : This is a 90.219 Class B device. This is NOT a CONSUMER device. It is designed
for installation by FCC LICENSEES and QUALIFIED INSTALLERS . You MUST have an FCC
LICENSE or express consent of an FCC Licensee to operate this device. You MUST register
Class B signal boosters (as defined in 47 CFR 90.219) online at www.fcc.gov/signal-
boosters/registration. Unauthorized use may result in significant forfeiture penalties, including
penalties in excess of $100,000 for each continuing violation. The installation procedure must
result in the signal booster complying with FCC requirements 90.219(d). In order to meet FCC
requirements 90.219(d), it may be necessary for the installer to reduce the UL and/or DL output
power for certain installations.
ATTENTION: This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
ATTENTION: FCC regulation mandate that the ERP of type B devices should not
exceed 5W (+37dBm). This device has a maximum programmable composite output
power of 10W (+40dBm), therefore this unit should always have its output attenuated
by 3dB, including cable loss, splitter loss, directional coupler loss, all passive elements
loss and also antenna gain. The loss in cables and passive devices connected to the
output of the device and the gain of the DL antenna should be of -3dBi or less and maintain a
minimum separation of 45
cm from all persons