THIS MACHINE CAN BE CORRECTLY USED AS FOLLOWS:
The sweeper to be used on flat surfaces or slopes up to 13% and to sweep floors with any lining,
excluding carpets.
THIS MACHINE IS NOT SUITABLE FOR ANY OTHER USE AND
PARTICULARLY:
it cannot be used as a tractor, on slopes beyond 13% or as a vehicle to transport people.
HANDLING THE PACKED MACHINE
The machine is delivered on a pallet, packed inside a plywood or carton box. The weight and dimensions
are shown in the STANDARD FEATURES. The barycenter position is indicated by a black arrow both
on the packing box and in the middle of the forks. The box should be handled carefully, avoiding shocks
and any unnecessary lifting at excessive heights. Never stack the boxes.
UNPACKING THE MACHINE
Unpack the machine with extreme care. First, cut the straps using proper cutting nippers, paying attention
to the spring-back. Then, from the carton base, remove the staples fixing the carton to the pallet using
a screwdriver or a proper tool. Then, lift the carton. In case of plywood, remove the staples from the
sides and the base of each panel. The machine is further locked by other straps to be cut as previously
described. Now take the machine on the soil using a metal or wooden ramp.
HANDLING THE UNPACKED MACHINE
Check the unpacked machine and, if necessary, install the batteries. If a long transport is required, we
recommend to pack the machine again in its original box. Note that the machine can be pushed for short
paths.
FIG. 1
4
