USE AND MAINTENANCE MANUAL
Road Sweeper S150
Page
25
of
54
WARNING
When the forwarding pedal is released, the hydrostatic drive brakes until stopping
the sweeper. If this is not enough also use the service brake "B" (see Picture). The
forwarding pedal must be used and released carefully and gradually to avoid
dangerous jamming of the sweeper. BEFORE START MOVING THE VEHICLE MAKE
SURE THAT THE PARKING BRAKE IS OFF (switch button 16 chap. 3.3)
WARNING
When using the transfer speed (position II) the operating controls are completely
disabled.
WARNING
After stopping, before leaving the vehicle, pull the steering column switch unit lever
in neutral position "N" AND ONLY WHEN THE VEHICLE IS FULLY STOPPED INSERT
THE PARKING BRAKE BY USING THE SUITABLE BUTTON (button no. 16 chap. 3.3)
WARNING
The choice of the driving speeds (transfer and working) must never be carried out
when the machine is moving.
