TECHNICAL DATA
I42TD – I60TD
Rev. 00
January 2005
6/36
4. MACHINE FEATURES AND TECHNICAL DATA
4.1. IDENTIFYING THE MACHINE
A silver label is sticked on the protection case of the steering column and clearly shows the data referring to
the “CE” marking.
The label has never to be removed and should always be kept readable. In case of
damage t is necessary to ask for a duplicate. The autoscrubber machine cannot be sold
without the label.
4.2. DESCRIPTION AND COMPONENTS
The scrubbing machine – Mod. I42TD - has been designed to clean all flat surfaces by means of washing
and suction of the washing water.
The electric traction system is supplied by a series of batteries which supply energy to the brushes motors, to
the squeegee motor and to the suction motor.
The machine is equipped with two rotating brushes which wash the surface by means of water and
detergent. Whilst the machine is running forward, the back brush (squeegee) picks the water up that is
directly sucked into the recovery tank.
The accelerator pedal starts both the washing brushes and the suction motor which stop automatically after a
few seconds when you leave the pedal. When the washing brushes standstill, they are non more in contact
with the ground. In this way the bristles will not be damaged while the brushes are not working.
Thanks to the dashboard the operator can control all the machine functions and a series of LEDs shows to
the operator the battery status or the errors detected by the electronic card.
The operator can control all the main machine functions and in particular:
Start the washing brushes;
Regulate the quantity of water;
Start the suction motor;
Start the lift or the sink of the squeegee;
Choose the forward or back gear;
Start or stop the machine.
PICTURE N° 2.1
Inserire
targhetta
marcatura
