SAFETY
I42TD – I60TD
Rev. 00
January 2005
22/36
5.4. OPERATOR’S QUALIFY
The scheme below sumarizes the operator qualify requested for each kind of operation.
OPERATION
OPERATOR’S QUALIFY
Driving/control of the machine
Trained operator
Installation/ disinstallation
Fiorentini technician
Mechanical parts maintenance
Fiorentini technician
Electric parts maintenance
Fiorentini technician
Cleaning maintenance
Trained operator
Dismantling and demolition
Fiorentini technician
FIORENTINI S.r.l. suggests to train the operator before using the machine. The operator also must be
trained about safety rules and carefully read this manual.
FIORENTINI S.r.l. is not responsible for any possible damage to people and/or things caused by
the non-observance of the instructions dealt within this manual.
5.5. SAFETY AND WARNING DEVICES
Side brushes protection
I42TD – I60TD is equipped with two rotanting brushes made of nylon. The
machine cannot reach dangerous areas thanks to fixed steel protections set up
on each brush. These cases can be only willingly removed.
Warning devices
I42TD – I60TD is equipped with several warning devices:
One acustic warning device like a claxon. It has to warn people who are
near the machine while its operating;
One intermittent bleeper to warn people while the machine is reversing;
One flashing yellow light to signal the machine is operating.
•
It is absolutely forbidden to tamper or disconnect safety and warning devices while
the machine is working;
•
It is important to check periodically safety and warning devices (see § about
maintenance).
