CAUTION: DANGER
Never operate the machine when stopped for special operations (setting up, maintenance,
etc.). Before starting the work, check for any possible visible defects on the safety devices,
and the correct operation of the emergency stop pushbutton or of the equivalent mecha-
nism . Never operate the machine when the control panel indicates defective tools, warning
lights, etc.
MAKE SURE THAT:
- No strangers are present near the machine
- No strange objects (appliances, cloths, etc.) are on the machine
- The machine does not emit strange noises after its starting; if so, stop it immediately and
detect the cause.
All doors and protections are regularly closed.
Never let approach strangers near the machine. Use, maintenance and repair of the machi-
ne are allowed only to operators authorized by the person responsible of the machine, who
knows the manual contents. These operators should be persons fisically and intellectually
fit for this work, not under alcohol or drug effects.
MAINTENANCE INSTRUCTIONS
During the scrubbing operation, the maintenance of the machine and the replacement of
parts, it is necessary to extract the ignition key.
Instructions for battery:
- when charging the battery, let the battery cover open
- do not use free flames and do not smoke near batteries
- caution: liquid is corrosive
- do not cause sparks near the batteries
- battery gases are explosive
- do not cause any shortcircuits
- do not invert polarities
GENERAL NOTE
For any maintenance, revision or repair, engage qualified personnel or call an authorized
workshop. Use only original fuses with the prescribed current intensity. In case of a power
failure, disconnect the machine or the plant immediately. The electric installation should be
periodically inspected and checked. Any possible failure, such as detached connections and
burnt cables should be immediately removed.
CAUTION
To clean the machine, use aggressive detergent solutions, acids, etc. only when necessary
and with special care. Adhere to all instructions of the detergent manufacturer. Use protecti-
ve clothes (overalls, gloves, protective glasses, etc., see CEE standards).
OPERATIONS ON THE ELECTRIC INSTALLATION
The operations on the electric installation can be performed only by QUALIFIED ELECTRI-
CIANS, instructed in the electric characteristics of the machine and in accident prevention
rules.
CHECKS
The machine must be inspected by a technician, who checks the safety conditions of the
machine and any possible damages or defects visible from outside:
- before setting the machine at work
- after appropriate time intervals
- after any changes or repairs
- safety device control
SAFETY DEVICE CONTROL
All six month, check the efficiency of the safety devices, the inspection should be perfor-
med by qualified personnel of FIORENTINI S.p.A. or authorized by it. To grant the
efficiency of the safety devices, the machine should be overhauled by a technician of
FIORENTINI every 5 months.
Summary of Contents for I38UE
Page 9: ......