6
TRANSPORTATION
HANDLING OF PACKED MACHINE
The machine is supplied packed on pallet, closet in a box made of plywood or paper board. The
weight and sizes are showed in the normal characteristics.
The barycentre position is indicated by black arrow on the box. The forks of the lift truck or the
transpallet should be placed so that the black arrow indicated on the packing is about in the centre
of the forks. The package should be handled with extreme caution, this avoiding impacts or lifting it
to remarkable heights without any reasons. It is forbidden to stack the packages one another.
Fig. 2
UNPACKING THE MACHINE
1.
Cut the straps with proper cutting nippers
2.
Remove the clips on the paper board to the pallet
3.
In case of package made of plywood ,remove the clips on the sides and on the base of each
panel as well
4.
Remove the other clips fastening the machine by cutting them in the same way of external
ones
5.
Brought the machine at round level
HANDLING OF UNPACKED MACHINE
1.
Check the machine
2.
If the machine must handled for a short transport after being used, and remove the brushes and
the
squeegee. For longer transport, is recommended to pack the machine again in its original box
