13
MAINTENANCE SCHEDULE
During the cleaning and the maintenance of the machine remove the key.
DAILY
o
Clean the recovery tank and the filter of the vacuum motors.
WEEKLY
o
Check for the cleaning of the suction pipes and of the squeegee
o
Check the state of the rubber squeegee blades
MONTHLY
o
Check the filter of the clean water tank
EACH YEAR
o
Check the brush state of each motor
AFTER TWO YEARS
o
Check safety systems
Check electric installation
SQUEEGEE BLADE REPLACEMENTS
The squeegee blades should be replaced when the contact edge becomes worn; the perfection of the
edge is essential for a perfect drying. To replace the blades
o
The squeegee should be demounted from the machine and placed on the desk.
o
Now, remove the screws (fig) both on the front part and on the rear part of the squeegee, the
steel straps and remove worn rubber blades
o
Perform the inverse procedure and assemble the new blades, then adjust the squeegee.
Fig. 6
1. squeegee front blade
2. squeegee body
3. squeegee rear blade
4. squeegeecounterblade
5. squeegee straps
