FIORENTINI CARPETFOAM-18, Operator'S Manual

Page: 9 / 25

Revisione 08/002
ING. O. FIORENTINI S.R.L.
INDUSTRIAL CLEANING MACHINES
9
AFTERUSE
After Using the Carpetfoam
1. Turn the Foam Generation Lever (3)OFF.
2. Move the handle to the up right position to lift the brush off the floor. Always move the handle to the
upright position when the machine is not in use to prevent the brush bristles from being bent over
and taking a"set".
3. Unplug the Power Cord
(13)
and wrap it around the Core Hook(12)and the Handle (1) for storage.
4. Drain unused solution from the tank into a separate container for future use. The Drain(10) is
located at the bottom rear of the solution tank.
5. Rinse the under side of the Brush Housing(7).
6. Wipe the machine with a clean, damp cloth. Store the machine in doors in a clean, dry place.
After Using the FoamaTron
1. Turn the Foam Generation Lever(3) OFF at the
Carpetfoam.
2. Disconnect the Power Brush from the Carpetfoam.
3. Carefully rinse the FoamaTron hose and brush with clean water, DO NOT allow water to reach the
electric motor!
4. Wipe the Power Brush with a clean, damp cloth. Store indoors in a clean, dry place.