FIOCCHETTI ECT-F TOUCH User And Maintenance Manual Download

Page: 44 / 56

TOUCH SCREEN DRAWBACKS

For the following drawbacks, please, contact technical service in order to perform tests and
find out causes.

DRAWBACK

POSSIBLE CAUSE

SOLUTION

Screen red-black-
white color



Electrical parts disconnected



Electromagnetic fields



Display under mechanical pressure



Spikes surge



Contact service

Icons do not react to
commands

Icons execute
commands other
than



Improper use of screen with pens

and pins, screen marked or spoiled



Unbalanced screen



Display under mechanical pressure



Use stylus for touch screens



Contact service



Touch screen does not

support multi touch, it does
not recognize contemporary
events.

System stuck in
“starting system”
mode



O.S. files damaged by power

surges



Contact Service

Lock does not open



Electrical or mechanical problem



Use the supplied key for

unlock (Par.5.2.6) and
contact service

Summary of Contents for ECT-F TOUCH

























































Search results

Summary of Contents for ECT-F TOUCH

Reviews:

Related manuals for ECT-F TOUCH

Brands by name

Popular brands

FIOCCHETTI ECT-F TOUCH, User And Maintenance Manual

Search results

Summary of Contents for ECT-F TOUCH

Reviews:

Related manuals for ECT-F TOUCH

Brands by name

Popular brands