Step 5:
Slide the non-marring knife clamp into the
“T” slot on the clamping post.
Step 6:
Loosen the guide rod locking collar using the
small hex key. Remove the collar from the guide rod
making sure not to remove the bolt completely.
Step 7:
Slide the guide rod through adjustable guide
rod post and reattach the guide rod locking collar on
the guide rod.
Step 8:
Position the Diamond hone
block holder with the open side
facing up. Attach your desired hone
block by snapping it firmly into the
holder in place.
Step 9:
Place the large and small hex keys into the
holes provided on the clamping post to hold the
knife clamp in place and have them easily available
for future use.
You are now ready to sharpen your knife!
մClamping Blade
Always clamp your blade in the same orientation.
4
