very light consistent pressure is needed while using a
diamond hone block to ensure a consistent contact
is being made across the entire knife edge.
Use the entire length of the diamond hone while
making full strokes across the entire blade edge or
section with each pass.
After each pass, lift the
diamond hone from the knife
edge and bring it back to the
starting position and repeat
as needed. For best results use
the same number of strokes
on each side of your knife.
While sharpening the
opposite side of the blade,
keep the knife secured in
the clamp. Remove the large
hex key and the clamp from
the “T” slot. Flip the clamp
over, reinsert it into the “T”
slot and secure in place by
inserting the large hex key
back in its storage position.
* Knife not included
11
