71-0163
Page 12
4215-138
Rev. 01
09/07/2021
User and installation manual for SL2 Sound Bar
(Optional)
This Bluetooth Audio system has been designed exclusively for use with the SL2 and SL2-C sauna
control systems. Do not attempt to connect to any other control system. Record the product serial
number, found on the back of the sound bar in the space designated on the back of this document and save
for future reference.
Mounting SL2 Sound Bar
•
It is recommended that you mount the sound bar off the sauna floor. Attach the wooden cleat as
shown in Diagram B with the bevel facing up, using the 2” Torx bit screws. The best sound will
be achieved if the sound bar is mounted in the center of the back wall. You may want to
experiment with locations before securing the wall cleat.
•
Hang the SL2 sound bar on the wall cleat. (Mating cleat is located on the back of the sound bar.)
•
Connect the sound bar power cord to the “CN6” port, located inside the SL2 or SL2-C contactor
box.
Upper Bench
SL2 CB
BOX
Diagram A
Diagram B
8” min.
Lower Bench
Upper Bench
Back wall of sauna
CN6 Audio
Power
