710-0148 HM 44
Page 8 of 11
08/06/19
Rev. 01
20.
Rinse the rocks of dirt and
dust. Install the rocks into the heater. Place small or flat rocks around the outer perimeter of heat
chamber, including the ends. Place larger rocks loosely in middle of heater. Fill the heater until
flush with the top of the outer shroud. Add 3 to 4 large rocks to top of heater.
*Note
: There will be extra rocks provided. The concept of rock placement is to promote good
airflow through the heater.
*Note
: Use only the “olivine” sauna rocks provided with
the heater. If other rocks are used, the warranty is void.
Never operate the heater without rocks.
21.
Install the rock grill to the top of the heater with the two
screws.
22.
Verify all connections are completed before applying power to room to test the lights.
23.
Install lower bench on the lower wall supports.
24.
Install upper bench and secure to the back wall.
25.
Place back rest on top bench and connect the lighting from the right
edge of the back to the back rest.
Note: Test lights before mounting the back rest.
