REV. 01 2016
24 / 28
CHAPTER 8 - OPERATION AND USE
Never operate the lift with any person or equipment below.
Never exceed the rate lifting capacity.
Always ensure that the mechanical safeties are engaged before any attempt is
made to work on or near the vehicle.
Always lift a vehicle on the lifting pads.
Never leave the lift in an elevated position unless the safeties are engaged.
Do not permit the electric control panel to get wet!
8.1 CONTROLS
Figure 21 - CONTROL PANEL
Controls for operating the lift are:
POWER
SWITCH
(1)
The switch can be set in two positions:
0 position:
the
lift electric circuit is not powered; the switch can be padlocked to prevent the
use of the lift.
1 position:
lift electric circuit is powered
PILOT LAMP (2)
It indicates that the
lift electric circuit is powered.
LIFTING BUTTON (3)
When pressed, the motor and hydraulic circuit are operated and the lift will be raised
SAFETY BUTTON (4)
When pressed, the lowering solenoid valve operates the hydraulic circuit to lower the lift to
engage the nearest safety rack.
1
2
3
4
5
6
7
