Finlux ST-55U01, User Manual

Page: 21 / 103

English - 20 -
RS232 Command Table
AUDIO COMMANDS
Command Description Parameter Return
VOLUME Set volume level. integer n (0 ≤ n ≤ 100) #*set volume to n
GETVOLUME Volume level information. no parameter #*volume level is ...
HEADPHONEVOLUME
Set headphone volume
level.
integer n (0 ≤ n ≤ 100) #*set headphone volume to n
GETHEADPHONEVOLUME
Headphone volume level
information.
no parameter #*headphone volume is ...
GETMUTE Get mute value on/off. no parameter
#*MUTE OFF
or
#*MUTE ON
SETMUTE Set mute value on/off. no parameter
#*MUTE OFF
or
#*MUTE ON
SETSOUNDMODE
Set sound mode.
SETEQUSERFREQ
100Hz 10
integer n (0 = mono, 1 =
stereo, 2 = dual I, 3 = dual
II, 4 = mono left, 5 = mono
right)
#*setSoundMode() set to n
or
#*Invalid sound mode entered
SETBALANCE Set balance value. integer n (-50 < n < 50)
#*set balance level to n
or
#*invalid balance level entered
GETBALANCE Get balance value. no parameter #*balance level is ...
SETAVL Set AVL state. integer n (0 = off, 1 = on) #*set avl state to n
GETAVL Get AVL state. no parameter #*avl state is ...
SETDYNAMICBASS Set dynamic bass state. integer n (0 = off, 1 = on) #*set dynamic bass state to n
SETSURROUNDSOUND
Set surround sound
state.
integer n (0 = off, 1 = on) #*set surround sound state to n
SETEQUSERFREQ
Set equalizer user freq.
value for any band.
string-integer n (120Hz,
500Hz, 1.5KHz, 5KHz,
10KHz)
sample: SETEQUSERFREQ
120Hz 10
#*setEQUserFreq() set to n
or
#*Incorrect sound system
parameter entered
GETDIGITALOUT Get digital out. no parameter
#*digital out is pcm
or
#*digital out is compressed
SETSOUNDSYSTEM Set sound system. string n (M, BG, I, DK, L, LP)
#*setSoundSystem() to n
or
#*Incorrect sound system
parameter entered
SETEQMODE Set equalizer mode.
string n (Music, Movie,
Speech, Flat, Classic, User)
#*setEQMode() set to n
or
#*Incorrect equalizer parameter
entered
SETDIGITALOUT
Set digital out. string n (compressed, pcm)
#*setDigitalOut() set to n
or
#*Incorrect digital out mode
parameter entered
HARDOFHEARING
Set hard of hearing state. integer n (0 = off, 1 = on) #*set hardofhearing state to n