EN -23-
Warnings for Temperature Settings
•
The ambient temperature, temperature of the freshly stored food and how often the door
is opened, affects the temperature in the refrigerator compartment. If required,change
the temperature setting.
•
It is not recommended that you operate your fridge in environments colder than 10°C in
terms of its efficiency.
•
The thermostat setting should be done by taking into consideration how often the
fresh food and freezer doors are opened and closed, how much food is stored in the
refrigerator, and the environment in which the refrigerator is located.
•
Your fridge should be operated up to 24 hours according to the ambient temperature
without interruption after being plugged in to be completely cooled. Do not open doors
of your fridge frequently and do not place much food inside it in this period.
•
A 5 minute delaying function is applied to prevent damage to the compressor of your
fridge, when you take the plug off and then plug it on again to operate it or when an
energy breakdown occurs. Your fridge will start to operate normally after 5 minutes.
•
Your fridge is designed to operate in the ambient temperature intervals stated in
the standards, according to the climate class stated in the information label. It is not
recommended that your fridge is operated in the environments which are out of the
stated temperature intervals in terms of
cooling efficiency.
•
This appliance is designed for use at an
ambient temperature within the 16°C - 32°C
range.
Climate
Class
Ambient Temperature
o
C
T
Between 16 and 43 (°C)
ST
Between 16 and 38 (°C)
N
Between 16 and 32 (°C)
SN
Between 10 and 32 (°C)
Temperature indicator
In order to help you better set your refrigerator, we have equipped it with a temperature
indicator located in the coldest area.
To better store the food in your refrigerator, especially in the coldest area, make sure
the message “OK” appears on the temperature indicator. If "OK" does not appear,
this means that the temperature setting has not been done properly.
Since “OK” appears in black, it will be difficult to see this indication if the temperature
indicator is badly lit. To be able to see this indication properly, there should be enough light.
Each time the temperature setting device is changed, wait for the stabilisation of the
temperature inside the appliance before proceeding, if necessary, with a new temperature
setting. Please change the position of the temperature setting device progressively and wait
at least 12 hours before starting a new check and potential change.
NOTE:
Following repeated openings (or prolonged opening) of the door or after putting fresh
food into the appliance, it is normal for the indication “OK” not to appear in the temperature
setting indicator. If there is an abnormal ice crystals build-up (bottom wall of the appliance)
on the refrigerator compartment evaporator (overloaded appliance, high room temperature,
frequent door openings), set the temperature setting device to a lower position until
compressor off periods are obtained again.
OK
Summary of Contents for FBGN.2610A+
Page 31: ......
