English - 83 -
cases where network quality is poor and the
wifi dongle needs to be placed to a location
with better signal quality.
•
The Wireless LAN adaptor supports
802.11 a,b,g & n type modems. It is highly
recommended that you should use the IEEE
802.11n communication protocol in order to
avoid any possible problems while watching
videos.
•
Use the other USB input, if you experience
problems with audio/video performance.
•
You must change your modem’s SSID when
there are any other modems around with the
same SSID. You can encounter connection
problems otherwise. Use a wired connection
if you experience problems with a wireless
connection.
Configuring Wireless Device Settings
To enable Wi-Fi features, plug in the Wi-Fi
dongle to one of the USB ports. Open the
Network/Internet Settings
menu and select
Network Type
as
Wireless Device
to start
connection process.
The TV will scan the wireless networks
automatically. A list of available networks
will be displayed. Please select your desired
network from the list.
NOTE:
If the modem supports N mode, you
should set N mode settings.
If the selected network is protected with a
password, please enter the correct key by using
the virtual keyboard. You can use this keyboard
via the directional buttons and the
OK
button
on the remote control.
Wait until the IP address is shown on the screen.
This means that the connection is now
established. To disconnect from a wireless
network, highlight
Network Type
and press
Left or Right buttons to set as
Disabled
.
Highlight
Internet Speed Test
and press the
OK
button to check your internet connection
speed. Highlight
Advanced
Settings
and press
the
OK
button to open the advanced setting
menu. Use directional and numeric buttons
to set. Press the
OK
button to save settings
when complete.
Other Information
The status of the connection will be displayed as
Connected
or
Not
Connected
and
the current
IP address, if a connection is established.
Connecting to your mobile device via
WiFi
•
If your mobile device has WiFi feature, you
can connect it to your TV via a router, in order
to access the content in your device. For this,
your mobile device must have an appropriate
sharing software.
•
Connect to your router following the steps
stated above in the
Wireless Connectivity
section.
•
Afterwards, engage your mobile device with the
router and then activate the sharing software on
your mobile device. Then, select files that you
want to share with your TV.
•
If the connection is established correctly, you
will be able to access the shared files from
your mobile device via the
Media Browser
of your TV.
•
Enter the
Media Browser
menu and the
playback device selection OSD will be
displayed. Select your mobile device and press
the
OK
button to continue.
•
If available, you can download a virtual
remote controller application from the
server of your mobile device application
provider.
NOTE:
This feature may not be supported
on all mobile devices.
