English - 72 -
(*)
Images must have an aspect ratio between
4:3 to 16:9 and they must be in .jpeg, .jpg or
.jpe file formats. The image cannot be set as
boot logo, which’s resolution doesn’t appear
on the info banner.
FollowMe TV (if available)
With your mobile device you can stream
the current broadcast from your smart TV
using the
FollowMe TV
feature. Install the
appropriate Smart Center application to your
mobile device. Start the application.
For further information on using this feature
refer to the instructions of the application
you use.
NOTE:
This application may not be compatible
with all mobile devices. Both of the devices
must be connected to the same network.
CEC and CEC RC
Passthrough
This function allows to control the CEC-
enabled devices, that are connected through
HDMI ports by using the remote control of
the TV.
The
CEC
option in the
System>Set-
tings>More
menu should be set as
Enabled
at first. Press the
Source
button and select the
HDMI input of the connected CEC device
from the
Sources List
menu. When new CEC
source device is connected, it will be listed in
source menu with its own name instead of the
connected HDMI ports name(such as DVD
Player, Recorder 1 etc.).
The TV remote is automatically able
to perform the main functions after the
connected HDMI source has been selected.
To terminate this operation and control
the TV via the remote again, press
Quick
Menu
button on the remote, highlight the
CEC RC Passthrough
and set as
Off
by
pressing Left or Right button. This feature
can also be enabled or disabled under the
System>Settings>More
menu.
The TV supports also ARC(Audio Return
Channel) feature. This feature is an audio
link meant to replace other cables between
the TV and the audio system (A/V receiver
or speaker system).
When ARC is active, TV does not mute
its other audio outputs automatically. So
you need to decrease TV volume to zero
manually, if you want to hear audio from
connected audio device only (same as other
optical or co-axial digital audio outputs).
If you want to change connected device’s
volume level, you should select that device
from the source list. In that case volume
control keys are directed to connected audio
device.
NOTE:
ARC is supported only via the
HDMI2 input.
System Audio Control
Allows an Audio Amplifier/Receiver to
be used with the TV. The volume can be
controlled using the remote control of the
TV. To activate this feature set the
Speakers
option in the
System>Settings>More
menu
as
Amplifier
. The TV speakers will be muted
and the sound of the watched source will be
provided from the connected sound system.
NOTE:
The audio device should support
System Audio Control feature and CEC
option should be set as Enabled.
