English
- 17 -
Now/Next Schedule
In this layout option, only the current and next events of
the listed channels will be displayed. You can use the
directional buttons to scroll through the list of the events.
Press
Back/Return
button to use available tab options.
Highlight
Filter
tab and press
OK
WRVHHWKH¿OWHULQJ
options. To change the layout highlight
Timeline
Schedule
and press
OK
.
Event Options
Use the directional buttons to highlight an event and
press
OK
button to display
Options
menu. The following
options are available.
Select Channel:
Using this option, you can switch to the
selected channel in order to watch it. The programme
guide will be closed.
More Info:
Display detailed information on the selected
event. Use up and down directional buttons to scroll
through the text.
Set Timer on Event / Delete Timer on Event:
Select
Set Timer on Event
option and press
OK
. You can
set timers for future events. To cancel an already set
timer, highlight that event and press the
OK
button.
Then select
Delete Timer
on Event
option. The timer
will be cancelled.
Record / Delete Rec. Timer:
Select the
Record
option and press the
OK
button. If the event is going
to be broadcasted at a future time, it will be added
to
Timers
list to be recorded. If the selected event is
being broadcasted at the moment, recording will start
immediately.
To cancel an already set record timer, highlight that
event and press the
OK
button and select the option
Delete Rec. Timer
. The record timer will be cancelled.
IMPORTANT:
&RQQHFWD86%GLVNWR\RXU79ZKLOHWKH79LV
VZLWFKHGR௺<RXVKRXOGWKHQVZLWFKRQWKH79WRHQDEOHWKH
recording feature.
Notes: You cannot switch to any other channel while there is
an active recording or timer on the current channel.
It is not possible to set timer or record timer for two or more
individual events at the same time interval.
Teletext Services
Press the
Text
button to enter. Press again to activate
mix mode, which allows you to see the teletext page and
the TV broadcast at the same time. Press once more
to exit. If available, sections in the teletext pages will
become colour-coded and can be selected by pressing
the coloured buttons. Follow the instructions displayed
on the screen.
Digital Teletext
Press the
Text
button to view digital teletext information.
Operate it with the coloured buttons, cursor buttons
and the
OK
EXWWRQ7KHRSHUDWLRQPHWKRGPD\GLႇHU
depending on the contents of the digital teletext. Follow
the instructions displayed on the digital teletext screen.
When the
Text
button is pressed again, the TV returns
to television broadcast.
Software Upgrade
<RXU79LVFDSDEOHRI¿QGLQJDQGXSGDWLQJWKH¿UPZDUH
automatically via the broadcast signal.
Software upgrade search via user interface
On the main menu select
Settings>System
and then
More
. Navigate to
Software upgrade
and press the
OK
button. Then select
Scan for upgrade
and press
OK
button to check for a new software upgrade.
If a new upgrade is found, it starts to download the
upgrade. After the download is completed, a warning
will be displayed, press
OK
button to complete software
upgrade process and restart TV.
3 AM search and upgrade mode
Your TV will search for new upgrades at 3:00 o’clock if
Automatic scanning
option is set to
Enabled
and if the
TV is connected to an aerial signal. If a new software is
found and downloaded successfully, it will be installed
at the next power on.
Note: Do not unplug the power cord while led is blinking during
WKHUHERRWSURFHVV,IWKH79IDLOVWRFRPHRQDIWHUWKHXSJUDGH
XQSOXJZDLWIRUWZRPLQXWHVWKHQSOXJLWEDFNLQ
All updates are automatically controlled. If a manual search
is carried out and no software is found then this is the current
version.
Troubleshooting & Tips
TV will not turn on
Make sure the power cord is plugged in securely to a
wall outlet. Press the Power button on the TV.
Poor picture
Check if you have correctly tuned the TV.
Low signal level can cause picture distortion. Please
check antenna connections.
Check if you have entered the correct channel
frequency if you have performed manual tuning.
No picture
TV is not receiving any signal. Make sure the correct
source has been selected.
Is the antenna connected properly?
Is the antenna cable damaged?
Are suitable plugs used to connect the antenna?
If you are in doubt, consult your dealer.
No sound
Check if the TV sound is muted. Press the
Mute
button
or increase the volume to check.
Sound may be coming from only one speaker. Check
the balance settings from Sound menu.
Remote control - no operation
The batteries may be exhausted. Replace the
batteries.
English
- 18 -
The batteries maybe inserted incorrectly. Refer to
the section “Inserting the Batteries into the Remote”.
No signal on an input source
It is possible that no device is connected.
Check the AV cables and connections from your
device.
Check the device is switched on.
The Image is not centered in VGA source
To have your TV automatically center the image, enter
the
PC Position
menu in
Picture
menu, highlight
Autoposition
and press
OK
:DLWIRULWWR¿QLVK,QRUGHU
to set the position of the image manually you can use
H
Position
and
V
Position
options. Select the desired
option and use Left and Right directional buttons on
the remote to set.
Recording unavailable
To record a programme, you should first correctly
connect a USB storage device to your TV, while the
79LVVZLWFKHGRႇ<RXVKRXOGWKHQVZLWFKRQWKH79WR
enable recording feature. If you cannot record, check
the storage device is correctly formatted and there is
VXႈFLHQWVSDFH
USB is too slow
If a “USB disk writing speed too slow to record” message
is displayed on the screen while starting a recording,
try restarting the recording. If you still get the same
error, it is possible that your USB storage device does
QRWPHHWWKHVSHHGUHTXLUHPHQWV7U\XVLQJDGLႇHUHQW
USB storage device.
PC Input Typical Display Modes
The following table is an illustration of some of the
typical video display modes. Your TV may not support
all resolutions.
Index
Resolution
Frequency
1
640x480
60 Hz
2
800x600
56 Hz
3
800x600
60 Hz
4
1024x768
60 Hz
5
1024x768
66 Hz
6
1280x768
60 Hz
7
1280x960
60 Hz
8
1280x1024
60 Hz
9
1360x768
60 Hz
10
1400x1050
60 Hz
11
1600x1200
60 Hz
12
1920x1080
60 Hz
AV and HDMI Signal Compatibility
Source
Supported Signals
Available
EXT
(SCART)
PAL 50/60
O
NTSC 60
O
RGB 50
O
RGB 60
O
Side AV
PAL 50/60
O
NTSC 60
O
PC/YPbPr
480I, 480P
60Hz
O
576I, 576P
50Hz
O
720P
50Hz,60Hz
O
1080I
50Hz,60Hz
O
1080P
50Hz,60Hz
O
HDMI
480I
60Hz
O
480P
60Hz
O
576I, 576P
50Hz
O
720P
50Hz,60Hz
O
1080I
50Hz,60Hz
O
1080P
24Hz, 25Hz
30Hz, 50Hz,
60Hz
O
(X: Not Available, O: Available)
In some cases a signal on the TV may not be displayed
properly. The problem may be an inconsistency with
standards from the source equipment (DVD, Set-top
box, etc. ). If you do experience such a problem please
contact your dealer and also the manufacturer of the
source equipment.
