English
- 38 -
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all the
1.
channels that you subscribe to. For more information, see “Conditional
Access” section
USB Input (functional in DTV mode only
2.
Video Input is used for connecting video signals of external devices.Connect
3.
the video cable between the VIDEO IN socket on the TV and the VIDEO OUT
jack on your device.
Audio Inputs are used for connecting audio signals of external devices.
4.
Connect the audio cable between the AUDIO INPUTS on the TV and the
AUDIO OUTPUT jacks on your device.
Also to enable
PC/YPbPr
sound connection in such a case, use an
appropriate audio cable between the connected device’s audio outputs and
the TV’s audio inputs
Note: If you connect a device to the TV via the VIDEO or PC/YPbPr cable
you should also connect your device with an audio cable to the AUDIO
INPUTS of the TV to enable audio.
Headphone jack is used for connecting an external headphone to the system.
5.
Connect to the HEADPHONE jack to use headphones.
Power Connection
IMPORTANT: The TV set is designed to operate on 12 V DC. For this, an adaptor is used which gives
12 V voltage. Connect this adaptor to a system that supplies 230V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains .
To POWER
INPUT DC 12 V
terminal
AC adapter
SPDIF
SCART
HDMI
1
VGA
12V
DC IN
Coax.OUT
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
SPDIF
SCART
HDMI
1
VGA
12V
DC IN
Coax.OUT
A02_MB46_[GB]_(01-TV)_1186UK_IDTV_NICKEL15_19841W_MOBIL TV_10068939_50168658.indd 38
A02_MB46_[GB]_(01-TV)_1186UK_IDTV_NICKEL15_19841W_MOBIL TV_10068939_50168658.indd 38
11.06.2010 10:02:20
11.06.2010 10:02:20
