FTLF1217P2xTL Pluggable SFP Product Specification – September 2008
©
Finisar Corporation September 13, 2008 Rev. B
Page 6
V. General Specifications
Parameter Symbol
Min
Typ
Max
Units
Ref.
Data Rate
BR
51.8,
155,
125,
200
Mb/sec
1
Bit Error Rate
BER
10
-10
Max. Supported Link Length on
50/125
μ
m or 62.5
μ
m MMF @ OC-1
L
MAX1
3 km
2
Max. Supported Link Length on
50/125
μ
m or 62.5
μ
m MMF @ OC-3
L
MAX2
2 km
3
Max. Supported Link Length on
50/125
μ
m or 62.5
μ
m MMF @ FE
L
MAX3
2 km
4
Max. Supported Link Length on
50/125
μ
m or 62.5
μ
m MMF @ ESCON
L
MAX4
2 km
5
Notes:
1.
Multimode SONET OC-1 SR-0 and OC-3 SR-0, 100Base-FX and FDDI compliant as specified in
ANSI T1.416.01-1999
5
, IEEE Std 802.3
2
, and ISO/IEC 9314-3
3
respectively
.
ESCON compatible as
specified in Enterprise Systems Architecture/390
4
.
2.
At 51.8 Mb/s data rate per ANSI T1.416.01-1999
5
.
3.
At 155 Mb/s data rate per ANSI T1.416.01-1999
5
.
4.
At 125 Mb/s data rate per ISO/IEC 9314-3
3
5.
At 200 Mb/s data rate per Enterprise Systems Architecture/390
4
.
VI.
Environmental Specifications
Finisar 1310nm SFP transceivers have an industrial operating temperature range from
–40°C to +85°C case temperature.
Parameter Symbol
Min
Typ
Max
Units
Ref.
Case Operating Temperature
T
op
-40 85 °C
Storage Temperature
T
sto
-40 85 °C
VII. Regulatory Compliance
Finisar transceivers are Class 1 eye safety products and comply with US FDA
regulations. These products are certified by TÜV and CSA to meet the Class 1 eye safety
requirements of EN (IEC) 60825 and the electrical safety requirements of
EN (IEC) 60950. Copies of certificates are available at Finisar Corporation upon request.
Copies of the referenced certificates are available at Finisar Corporation upon request.